开式转子发动机研究进展

doi:10.13675/j.cnki. tjjs. 190084

推进技术 ›› 2019, Vol. 40 ›› Issue (9): 1921-1932.DOI: 10.13675/j.cnki. tjjs. 190084

• 综述 • 下一篇

开式转子发动机研究进展

周莉¹,是介¹,王占学¹

西北工业大学动力与能源学院陕西省航空发动机内流动力学重点实验室

发布日期:2021-08-15
基金资助:
国家自然科学基金 51576163 51876176;民机专项科研项目国家自然科学基金（51576163；51876176）；民机专项科研项目。

Research Progress in Open Rotor Engine

Shaanxi Key Labaratory of Internal Aerodynamics in Engine,School of Power and Energy,Northwestern Polytechnical University,Xi’an 710129,China

Published:2021-08-15

摘要/Abstract

摘要： 开式转子发动机以高推进效率、低燃油消耗率和低污染物排放的“一高两低”优势，成为经济友好型航空发动机的典型代表，是下一代民用飞机潜在的动力备选方案之一。本文主要从开式转子发动机总体性能仿真技术、对转桨扇设计技术、传动附件设计技术、部件及整机试验技术等四个方面，分析开式转子发动机研发历史及相关技术研究进展。结合国内开式转子发动机研究现状，梳理出开式转子发动机的发展脉络，归纳出开展开式转子发动机研究所涉及的关键技术，并对未来的研究重点和发展路线进行展望，以期为开式转子发动机相关技术的后续研究提供技术支持。

关键词: 开式转子发动机;燃油消耗率;污染物排放;总体性能仿真;对转桨扇设计

Abstract: With advantages of high propulsion efficiency, low fuel consumption and low pollutant emission, open rotor engine has become a typical representative of economical and friendly engine, being one of the potential power options for the next generation of civil aircraft. The development history and research progress of open rotor engine abroad were analyzed from four aspects: overall performance simulation, counter-rotating open rotor design, accessories design, components and engine test. The future research focus and development route of open rotor engine in China are prospected by review the current research situation in detail, and the key issues for developing open rotor engine in China are summarized to provide a reference and suggestion for the future research of open rotor engines.

Key words: Open rotor engine;Fuel consumption;Pollutant emission;Overall performance simulation;Counter-rotating open rotor design

周莉,是介,王占学. 开式转子发动机研究进展[J]. 推进技术, 2019, 40(9): 1921-1932.

ZHOU Li¹,SHI Jie¹,WANG Zhan-xue¹. Research Progress in Open Rotor Engine[J]. Journal of Propulsion Technology, 2019, 40(9): 1921-1932.

参考文献

[1] 季鹤鸣, 杨茂林. 实事求是发展航空发动机——百年航空发动机发展史中的若干启示[C]. 北京:中国航空学会航空百年学术论坛动力学分论坛， 2003.
[2] 张小伟. 民用航空发动机技术发展路线图[C]. 北京:第二届中国航空科学技术大会， 2015.
[3] 刘大响，金捷，彭友梅，等. 大型飞机发动机的发展现状和关键技术分析[J]. 航空动力学报， 2008， 23(6): 976-980.
[4] 吕飞. 航空燃油附加费征收标准的经济学分析[J]. 生产力研究， 2012， (1): 136-138.
[5] 韩书君. 现代民用航空发动机技术[J]. 军民两用技术与产品， 2016， 7(2).
[6] Zante D E V， Collier F， Orton A ， et al. Progress in Open Rotor Propulsors: The FAA/GE/NASA Open Rotor Test Campaign[J]. The Aeronautical Journal， 2014， 118(1208): 1181-1213.
[7] 王轩. 开式转子发动机设计与应用浅析[J]. 电子测试， 2016， (10): 18-19.
[8] 刘红霞，梁春华. 开式转子发动机研制与进展[J]. 国际航空， 2010， (4): 75-77.
[9] 严成忠. 开式转子发动机[M]. 北京：航空工业出版社， 2016.
[10] 严成忠. 绿色动力:开式转子航空发动机[J]. 航空科学技术， 2013， (1): 6-12.
[11] Zante D E V. Progress in Open Rotor Research: A U.S. Perspective[R]. ASME 2015-GT-42203.
[12] Reid C， General E C， Cincinnati O H. Overview of Flight Testing of GE Aircraft Engines' UDF Engine[R]. AIAA88-3082.
[13] Harris R， Cuthbertson R. UDF/727 Flight Test Program[R]. AIAA87-1733.
[14] Chapman D， Godston J， Smith D. Testing of the 578-DX Propfan Propulsion System[R]. AIAA89-2804.
[15] Peacock N . Engine Design and Systems Integration for Propfan and High Bypass Turbofan Engines[R]. AIAA87-1730.
[16] 佳力. 惟一投入使用的桨扇发动机D-27[J]. 国际航空， 2004， (2): 61-62.
[17] 胡晓煜. 下一代窄体客机发动机最新进展[J]. 航空发动机， 2010， 36(1): 59-62.
[18] Brouckaert J F， Mirville F， Phuah K， et al. Clean Sky Research and Demonstration Programmes for Next-generation Aircraft Engines[J]. The Aeronautical Journal， 2018， 122(1254): 1163-1175.
[19] Awker R W. Evaluation of Propfan Propulsion Applied to General Aviation [J]. Archive for Rational Mechanics & Analysis， 1985， 25(3): 201-242.
[20] Larsson L， Gr?nstedt T， Kyprianidis K G. Conceptual Design and Mission Analysis for a Geared Turbofan and an Open Rotor Configuration[R]. ASME 2011-GT-46451.
[21] Larsson L， Lundbladh A， Gr?nstedt T. A Conceptual Design Study of an Open Rotor Powered Regional Aircraft[R]. ASME 2014-GT-26091.
[22] Perullo C A， Tai J C M， Mavris D N. Effects of Advanced Engine Technology on Open Rotor Cycle Selection and Performance[J]. Journal of Engineering for Gas Turbines and Power， 2013， 135(7)： 071204.
[23] 金捷. 美国推进系统数值仿真（NPSS）计划综述[J]. 燃气涡轮试验与研究， 2003， 16(1): 57-62.
[24] Hendricks E S. Development of an Open Rotor Cycle Model in NPSS Using a Multi-Design Point Approach[R]. ASME 2011-GT-46694.
[25] Guynn M， Berton J， Hendricks E， et al. Initial Assessment of Open Rotor Propulsion Applied to an Advanced Single-aisle Aircraft[R]. AIAA2011-7058.
[26] Hendricks E， Tong M. Performance and Weight Estimates for an Advanced Open Rotor Engine[R]. AIAA2012-73911.
[27] Alexiou A， Frantzis C， Aretakis N， et al. Contra-rotating Propeller Modelling for Open Rotor Engine Performance Simulations[R]. ASME 2016-GT-56645.
[28] Bellocq P， Sethi V， Capodanno S， et al. Advanced 0-D Performance Modelling of Counter Rotating Propellers for Multi-Disciplinary Preliminary Design Assessments of Open Rotors[R]. ASME 2014-GT-27141.
[29] Bellocq P， Garmendia I， Sethi V. Preliminary Design Assessments of Pusher Geared Counter-Rotating Open Rotors - Part I: Low Pressure System Design Choices， Engine Preliminary Design Philosophy and Modelling Methodology[R]. ASME 2015-GT-43812.
[30] Bellocq P， Garmendia I， Sethi V. Preliminary Design Assessments of Pusher Geared Counter-Rotating Open Rotors - Part II: Impact of Low Pressure System Design on Mission Fuel Burn， Certification Noise and Emissions [R]. ASME 2015-GT-43816.
[31] Bellocq P， Garmendia I， Sethi V， et al. Multidisciplinary Assessment of the Control of the Propellers of a Pusher Geared Open Rotor-Part I: Zero-Dimensional Performance Model for Counter-Rotating Propellers[J]. Journal of Engineering for Gas Turbines and Power， 2016， 138(7)： 072602.
[32] Bellocq P， Garmendia I， Sethi V， et al. Multidisciplinary Assessment of the Control of the Propellers of a Pusher Geared Open Rotor - Part II: Impact on Fuel Consumption， Engine Weight， Certification Noise， and NOx Emissions [J]. Journal of Engineering for Gas Turbines and Power， 2016， 138(7): 072603.
[33] Bellocq P， Garmendia I， Legrand J， et al. Preliminary Design and Performance of Counter Rotating Turbines for Open Rotors-Part I: 1-D Methodology[R]. ASME 2016-GT-57918.
[34] Bellocq P， Garmendia I， Legrand J， et al. Preliminary Design and Performance of Counter Rotating Turbines for Open Rotors-Part II: 0-D Methodology and Case Study for a 160 PAX Aircraft [R]. ASME 2016- GT-57921.
[35] Zachariadis A， Hall C A， Parry A B. Contra-Rotating Open Rotor Operation for Improved Aerodynamics and Noise at Takeoff[R]. ASME 2011-GT-45205.
[36] Schnell R， Yin J， Voss C， et al. Assessment and Optimization of the Aerodynamic and Acoustic Characteristics of a Counter Rotating Open Rotor[J]. Journal of Turbomachinery， 2012， 134(6)： 061016.
[37] Kritikos K， Giordano E， Kalfas A I， et al. Prediction of Certification Noise Levels Generated by Contra-Rotating Open Rotor Engines[R]. ASME 2012-GT-69232.
[38] Busch E R ， Ke?ler Manuel ， Kr?mer Ewald . Numerical Investigation of Counter-Rotating Open Rotor Noise Emission in Different Flight Conditions[R]. ASME 2012-GT-68625.
[39] Danner F， Kendall-Torry C， Kau H P. Aerodynamic Origin of Rotor-Rotor Interaction Noise from Unducted Propulsors[R]. ASME 2013-GT-95572.
[40] Khalid S A， Wojno J P， Breeze-Stringfellow A， et al. Open Rotor Designs for Low Noise and High Efficiency[R]. ASME 2013-GT-94736.
[41] Quackenbush T R， Boschitsch A， Yu M. Initial Development of Physics-Based Aeroanalysis Methods for Open Rotor Conceptual Design[R]. AIAA2017-0053.
[42] Leborgne M， Lonfils T， Lepot I. Development and Application of a Multi-Disciplinary Multi-Regime Design Methodology of a Low-Noise Contra-Rotating Open-Rotor[R]. ASME 2015-GT-43432.
[43] Stapelfeldt S C， Parry A B， Vahdati M. Investigation of Flutter Mechanisms of a Contra-Rotating Open Rotor[R]. ASME 2015-GT-42159.
[44] Goulos I. Generalized Aerodynamic Modeling of Dynamic Wake Curvature for Open Rotors with Slender Blades[J]. Journal of Turbomachinery， 2016， 138(6)： 061001.
[45] Singh A， Kahraman A， Ligata H. Internal Gear Strains and Load Sharing in Planetary Transmissions-Model and Experiments[R]， ASME 2007-DETC-35047.
[46] Matsuoka T， Nishikawa H， Imai H， et al. Light weight and Low-Misalignment Planetary Gear System for Open Rotor Power Gearbox[R]. ASME 2007-DETC-47342.
[47] Imai H， Goi T， Kijima K， et al. Design and Test of Differential Planetary Gear System for Open Rotor Power Gearbox[R]. ASME 2013-DETC-12089.
[48] Billet M L. Mean Flow Measurements near the Plane of an Open Rotor Operating with an Inlet Velocity Gradient[J]. Journal of Engineering for Power， 1981， 103(2): 445-450.
[49] Ricouard J， Julliard E， Omais M， et al. Installation Effects on Contra-Rotating Open Rotor Noise[R]. AIAA2010-3795.
[50] Czech M， Thomas R. Experimental Studies of Open Rotor Installation Effects[R]. AIAA2011-4047.
[51] Czech M， Thomas R H. Open Rotor Installed Aeroacoustic Testing with Conventional and Unconventional Airframes[R]. AIAA2013-2185.
[52] Zante D E V， Wernet M P. Tip Vortex and Wake Characteristics of a Counterrotating Open Rotor[R]. AIAA2012-4039.
[53] Zante D E V. The NASA Environmentally Responsible Aviation Project / General Electric Open Rotor Test Campaign[R]. AIAA2013-0415.
[54] Zante D E V， Envia E. Prediction of the Aero-Acoustic Performance of Open Rotors [R]. ASME 2014-GT-26413.
[55] Slaboch P E， Stephens D B， Zante D E V， et al. Effect of Aft Rotor on the Inter-Rotor Flow of an Open Rotor Propulsion System[J]. Journal of Engineering for Gas Turbines and Power， 2017， 139(4)： 041202.
[56] 张帅，余雄庆. 面向飞机总体设计的开式转子发动机分析模型[J]. 航空动力学报， 2012， 27(8): 1801-1808.
[57] 屠秋野，倪力伟，杨祥明，等. 开式转子发动机计算模型及调节研究[J]. 航空发动机， 2016， 42(6): 36-43.
[58] 祁宏斌，周人治，黄红超，等. 开式转子发动机对转桨扇性能建模研究[J]. 燃气涡轮试验与研究， 2012， (1): 20-24.
[59] 祁宏斌，周人治，李刚团，等. 面向对象的开式转子总体气动数值仿真技术研究[C]. 贵阳: 中国科协年会，航空发动机设计、制造与应用技术研讨会， 2013.
[60] 马超，刘凯礼. 开式发动机对全机气动影响数值计算分析[C]. 南京: 第九届全国流体力学学术会议， 2016.
[61] 张锦绣， Jackson Anthony ，李泳凡. A320飞机换装开式转子发动机的匹配研究和直接使用成本计算[C]. 贵阳: 中国航空学会第七届动力年会， 2010.
[62] 刘政良，严明，洪青松. 开式转子叶片气动设计研究[J]. 航空科学技术， 2013， (6): 37-40.
[63] 周人治，郝玉扬，祁宏斌. 开式转子发动机对转桨扇设计[J]. 燃气涡轮试验与研究， 2014， (1): 1-5.
[64] 周人治，祁宏斌. 开式转子发动机对转桨扇匹配特性研究[J]. 航空科学技术， 2014， (4): 69-73.
[65] 夏贞锋，杨永. 对转开式转子非定常气动干扰特性分析[J]. 航空动力学报， 2014， 29(4): 835-843.
[66] 吴俣. 基于内外域结构的开式转子流场数值模拟[J]. 科技创新与应用， 2015， (32): 52-53.
[67] 侯明曦，信琦，王飞鸣. 开式转子发动机齿轮传动系统设计技术研究[J]. 航空科学技术， 2013， (4):34-37.

开式转子发动机研究进展

Research Progress in Open Rotor Engine

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价